.
|
|
Key
Features
- Bandwidth up
to 4.5MHz, covering ADSL, ADSL2+, HDSL, SDSL and SHDSL applications
on one and the same platform
- Highly accurate
simulation for Performance and Compliance testing of transmission
devices
- Wide variety
and flexibility in simulation parameters
- Standard libraries
and country specific libraries available
- Easy operation
and dialogue : Win95/98/NT/2000 Graphical User interface
- Future proof
investment
Benefits
- Designed to
test performance for high bandwidth applications AND compliance testing
on ANSI / ETSI / Bellcore standards.
- Lines can be
downloaded from standard libraries (ANSI - ETSI - Bellcore, ...) or
individually set according to the specific characteristics of the
loop under study.
- The AAC ®
technology provides the highest degree of reliability in simulation
environments, solving the instability issue inherent to the use of
passive components.
- Allows line
changes without hardware limitations with secondary parameters to
be set freely by the user.
- Stable and consistent
simulation; an accuracy of 0.5 dB with automatic startup calibration
and diagnostic self-testing.
- Accurate simulation
of Propagation and Group Delay, calculated on the basis of exact parameter
settings.
- Full duplex
bi-directional or unidirectional simulation.
- Easy insertion
of crosstalk, impulse noise, shaped noise and white noise.
- A Windows GUI
facilitating an easy and intuitive dialogue between system and user.
- Future proof
concept thanks to the combination of AAC ® technology, high frequency
range and software driven configuration.
Simulation
Features
- Simulation of
line attenuation, phase shifts and group delay for attenuation ranging
from 0 dB to 99 dB at 1 MHz.
- Simulation of
lines of different wire diameter, insulation material and temperature.
- Simulation of
propagation delays so that echo’s will return only after the correct
time delay.
- Simulation of
complex characteristic impedance of the line to enable proper testing
of analogue hybrid-circuits (Analogue Front End and generation of
the proper echo’s in case of impedance mismatching.
- Simulation of
the DC (copper-) resistance of the line to enable up to 400V remote
powering.
- Simulation of
different kinds of noise on the line.
- Simulation of
the dominant form of crosstalk: near-end crosstalk or NEXT.
- Selectable unidirectional
or bi-directional operation.
Product
Information
Please download the
pdf version for the full product description.
|
|
|
