.		Application The Ringing Generator RCG 1001 produces high voltage, low frequency sinus signals with an RMS value of 100 V (calling signal). The RCG 1001 provides the possibility to add a second high frequency signal (signal). Three different curve shapes are available (sinus, triangle, square). Description Both signals can be selected independently. The signals can be clipped with the help of a pushbutton or external instrument (Sparnex – MIG 1001) for specific impulse/pause timing. In addition the RCG 1001 contains an RMS-responsive instrument and indicates the adjusted frequency. The necessary terminating impedance (0 W, 200 W, 7,5 kW, "response", "no response") for verifying the response sensitivity (FTZ-directions 1TR2) are integrated. The output-current is limited to 100mA or customer adaptable. A LED indicates if the current has been limited. Another LED warns for higher voltages (> 45 rms) on the output - jack. Technical Specifications Generator 1 Frequency 10 Hz - 110 Hz Output Voltage Range 5V - 110 Vrms Shape of curve sinus wave THD < 1% Generator 2 Frequency 20 Hz - 20K Hz Output Voltage Range 0V - 20 Vrms Shape of curve Sinus, triangle, square wave THD < 1% Output TF u. - TAE - jack Internal resistance < 5 Ohm four terminals 0 Ohm, 200 Ohm, 7,5 kOhm "response", "no response" short-circuit-proof limited by 100mA or customer adaptable Product Information Please download the pdf version for the full product description. top
copyright© 2009 by Sparnex NV | contact us | Last update: January 2009