.
|
|
Key Features
- Bandwidth up
to 4.5MHz, covering ADSL, ADSL2+, HDSL, SDSL and SHDSL applications
on one and the same platform
- Highly accurate simulation for Performance and Compliance testing of transmission devices
- Wide variety and flexibility in simulation parameters
- Standard libraries and country specific libraries available
- Easy operation
and dialogue : Win95/98/NT/2000 Graphical User interface
- Future proof investment
Benefits
- Designed to test performance for high bandwidth applications AND compliance testing on ANSI / ETSI / Bellcore standards.
- Lines can be downloaded from standard libraries (ANSI - ETSI - Bellcore, ...) or individually set according to the specific characteristics of the loop under study.
- The AAC ® technology
provides the highest degree of reliability in simulation environments,
solving the instability issue inherent to the use of passive components.
- Allows line changes without hardware limitations with secondary parameters to be set freely by the user.
- Stable and consistent
simulation; an accuracy of 0.5 dB with automatic startup calibration
and diagnostic self-testing.
- Accurate simulation of Propagation and Group Delay, calculated on the basis of exact parameter settings.
- Full duplex bi-directional
or unidirectional simulation.
- Easy insertion of crosstalk, impulse noise, shaped noise and white noise.
- A Windows GUI facilitating an easy and intuitive dialogue between system and user.
- Future proof concept thanks to the combination of AAC ® technology, high frequency range and software driven configuration.
Simulation Features
- Simulation of line attenuation, phase shifts and group delay for attenuation ranging from 0 dB to 99 dB at 1 MHz.
- Simulation of lines of different wire diameter, insulation material and temperature.
- Simulation of propagation delays so that echo’s will return only after the correct time delay.
- Simulation of complex characteristic impedance of the line to enable proper testing of analogue hybrid-circuits (Analogue Front End and generation of the proper echo’s in case of impedance mismatching.
- Simulation of the DC (copper-) resistance of the line to enable up to 400V remote powering.
- Simulation of different kinds of noise on the line.
- Simulation of the dominant form of crosstalk: near-end crosstalk or NEXT.
- Selectable unidirectional
or bi-directional operation.
Product Information
Please download the
pdf version for the full product description.
|
|
|
